Hp Envy Pro 6400 Setup | Unboxing Steps

  • Home/
  • Hp Envy Pro 6400 Unboxing Setup

Have you recently purchased the HP ENVY Pro 6400 printer and looking out to set it up for the first time? Alright, you are on the right site. Hp Envy Pro 6400 Setup is a multi-purpose home printer that produces high-quality photo and document outputs. This printer enables you to print, scan, and copy any document or picture from your computer, laptop, tablet, or any other device.

Now, you can complete your printer setup by carrying out the instructions provided below.

Hp Envy Pro 6400 printer Setup

Unboxing The Printer

Contents Inside The Box

  • HP ENVY Pro 6400 printer
  • HP Setup Black Cartridge
  • HP Setup Tri-color Cartridge
  • Regulatory Flyer
  • Setup Guide
  • Reference Guide
  • Power Cord

Confirm that all the contents are available inside the box and delivered without any defects or damages.

Printer Unpacking

  • Open the printer box and remove the setup documents, power cord, and ink cartridges from the package.
  • Take the HP ENVY Pro 6400 printer out of the printer box. Dispose of the foam packing materials from the sides of your printer.
  • Carefully take the printer from its plastic cover.
  • Now, you can discard all the blue protective tapes surrounding the printer.

Switching On The Printer

  • Plug the power cable into the respective port at the printer’s back and the other end into an electrical outlet.
  • Now, the printer will turn on automatically. In case it does not turn on, press the printer’s Power button.
  • You will see a purple light flashing at the center of the HP ENVY Pro 6400 printer.

Loading The Paper

  • Now, you will see the light blinking on the paper tray, indicating where to slide out the tray.
  • Pull out the input paper tray from the printer.
  • Move the paper width guide to the outermost position.
  • Insert the plain white sheets into the paper tray and adjust the paper width guide until it rests at the edges of the stack.
  • Close the input tray.

Installing Ink Cartridges

  • Now, a light will blink on your printer’s corner, which tells you where to install the ink cartridges.
  • Lift the ink cartridge access door.
  • Remove one of the cartridges from the package and discard the protective tapes.
  • Next, lift the cartridge lid inside the printer.
  • Insert the ink cartridge into the respective slot.
  • Close the cartridge lid.
  • Repeat these instructions to insert the remaining ink cartridges.
  • Close the ink cartridge access door.
  • Now, the HP ENVY Pro 6400 printer will automatically print the alignment page.
  • Lift the scanner lid and load the alignment page with the print side down on the scanner glass to complete the alignment process.

Software Setup

  • Access the default browser on your computer and visit the printer’s official support page.
  • Click the Support tab at the top of the window.
  • Pick the Software and drivers option.
  • Now, click the Printer category.
  • Search for your printer model and click Submit.
  • Your computer’s operating system will be shown automatically on the next page. You can even change the OS using the Choose a different OS link.
  • Select your respective operating system and its version from the drop-down menus.
  • Next, you need to click on the Change button.
  • Choose the HP Easy Start Printer Setup Software file below the Installation Software and Full/Basic Driver section. Next, click on the Download button.
  • Choose The Hp Easy Start Printer Setup
  • Now, the HP Easy Start software will start to download.

You can complete your printer’s unboxing and software setup by following the above instructions.

For further queries and clarifications about Hp Envy Pro 6400 Setup, contact us by utilizing the call option provided on this page.