HP ENVY Photo 7858 setup is a printer that is designed for both home and small office workgroups. If you are wondering how to set up this printer, continue reading this page. Without further ado, let’s begin with the contents in the printer box and the instructions for the setup.
Hardware Setup - Hp Envy Photo 7858
HP ENVY Photo 7858 printer
HP 64 Black Cartridge
HP 64 Tri-Color Cartridge
Ink Caution Flyer
Getting Started Guide
Now, check if all the contents are available inside the package.
Unboxing The Hp Envy Photo 7858 Printer
First, select a proper place to unpack the printer. Let it be near an electrical outlet. Pick a stable, neat surface to keep the printer on.
Next, open the box and remove all the accessories provided along with the printer.
Pull the printer out of the box. Remember to do it with caution because there are chances that the printer might get damaged while taking it out of the box.
Dispose of the foam packing materials from the sides of the HP ENVY Photo 7858 printer. Now, remove the printer from the plastic cover.
Discard all the blue protective tapes surrounding the printer.
You can now open the input paper tray and remove the protective tapes inside it.
Close the input paper tray.
Connecting The Power Cord
Plug the power cord into the printer’s back section and the other end into the electrical outlet (near which you have placed the printer).
Switch on your printer.
Now, go to the printer control panel and then pick your language.
Tap Yes to confirm.
Next, choose your country/region.
Installing The Ink Cartridges
First, lift the printer’s ink cartridge access door.
Next, unwrap one of the ink cartridges from the package.
Take out the protective tape from the cartridge. Now, insert the ink cartridge carefully into the respective slot.
Just redo the above steps to insert the other cartridge into its slot on the printer.
Close the ink cartridge access door.
Tap OK on the HP ENVY Photo 7858 printer screen after installing the ink cartridges.
Pull the input tray from the printer.
Slide the paper width guide in the tray as far as possible.
Take a stack of plain sheets. Fan and align the sheets neatly.
Load the stack into the input tray.
Adjust the paper width guide till it stops at the edges of the stack.
Insert the input tray into the printer.
Pull the output tray and its extension.
Tap OK on the printer screen to confirm loading sheets inside the paper tray.
Now, the HP ENVY Photo 7858 printer will start to print the alignment page automatically.
When you see the Alignment Successful message on the printer screen, touch OK.
Software Setup - Hp Envy Photo 7858
First, you need to launch a web browser on your computer.
Next, navigate to the printer’s official support page.
Click on the Support tab and select the Software and drivers option from the list.
Choose the Printer category.
Type your printer model name below the Enter your product name option and click on the Submit button.
Now, your computer’s operating system will be shown automatically at the top of the next page.
If you want to change the operating system, click on the Choose a different OS option. Then, pick your respective operating system from the list.
Select the printer’s driver file from the list and click the Download option.
Now, the HP ENVY Photo 7858 driver will start to download.
You can complete the printer’s hardware and software setup by following the above instructions.
If you have any other queries about Hp Envy Photo 7858 Setup, reach our technical experts. You can use the call button provided on this page for this purpose.