How to install Hp Envy 6455e Wireless Setup

Wireless connection is always the best and easiest way of connecting our devices. Hp Envy 6455e Wireless Setup supports wireless printing, and you can complete the Wi-Fi setup at a blazing speed. All you have to do is, complete your printer's first-time setup and connect your printer to the same network to which you have connected your computer. Then, you can print your documents wirelessly using the printer driver. Without further ado, let's get into the procedure.

Hp envy 6455e wifi setup

Complete Your hp envy 6455e wifi Printer First-time Setup

Before connecting your printer to your computer, you should complete your printer’s initial setup. The following instructions can help you in that regard.

  • Unpack your printer and discard the protective covers and packing tapes from the printer and its components.
  • Connect the power cord to your HP printer's power port and an electrical outlet. Now, your printer will turn on automatically.
  • Open the printer's cartridge access door and install the ink cartridges. Then, close the cartridge access door.
    • Open The Printers Cartridge Access Door
  • Extend the paper tray and load a paper stack into the tray. Don't forget to adjust the guides against the paper stack.

That's it. You have completed your printer's first-time setup. Now, let's learn how to connect your printer to your Wi-Fi network.

Connect Your Printer To Your Wi-fi Network

  • Press and hold the Wireless and the Power buttons on your printer for three seconds. This will start the WPS Push Button method on your printer.
    • Press And Hold The Wireless
  • Now, press your router's WPS button. The connection between your printer and computer will be established within a few seconds.
  • Despite having a WPS router, if you cannot locate the WPS button, you can connect your devices via the WPS PIN method.
  • To do this, you need to get the PIN code from your printer. Press the Information button on your printer until the control panel buttons light up. Then, press the Information and Down arrow buttons for five seconds. This will start the WPS PIN method, and simultaneously your printer will print a paper with the WPS PIN code.
  • Open your router's configuration utility on your browser and navigate to the WPS section. Then, enter the PIN that your printer has displayed.
  • Now, your printer will be connected to your router's network.

Connect Your Printer And Computer

  • From your default browser, visit the official page of HP.
  • Enter your printer model and download the software that supports your Operating System.
  • Once the driver is downloaded to your computer, run the setup file.
  • If you see the User Account Control (UAC) dialog box, click Yes.
  • On the software license agreement screen, accept the terms and conditions.
  • When prompted, select the connection method as Wireless.
  • Now, the installer will establish a connection between your printer and computer.
  • Go ahead with the instructions on the screen and complete the installation.
  • Hereafter, you can access your printer wirelessly.

In this manner, you should complete the Wi-Fi setup on your HP Envy 6455e printer. For further questions and clarifications about Hp Envy 6455e Wireless Setup, get in touch with our expert team.