HP Envy 6052e Setup - Complete Guidelines

Have you recently purchased the HP ENVY 6052e printer and going to set it up for the first time? No worries, you can easily perform the printer’s unboxing and software setup. Setting up the printer for the first time is a necessary process that you need to complete before you start to work with it. The HP envy 6052e setup process basically contains two methods; hardware and software setup. So, to make the setup process easier, we have included simple guidelines on this page.

HP Envy 6052e Setup

Hardware Setup - HP ENVY 6052e

Start the hardware setup by unpacking your printer package. This is the most required process that you have to perform before you start to operate your printer. With the proper setup, you can utilize all your printer functionalities without an issue. To perform your printer’s hardware setup, just follow the given instructions.

Let’s Unpack The HP ENVY 6052e Printer

  • Start by unpacking the printer box.
  • Remove the setup documents, power cord, and ink cartridges from the package.
  • Remove the HP ENVY 6052e printer from the plastic bag.
  • Now, start disposing of all the protective tapes outside and inside the printer.

Connecting The Power Cord - HP ENVY 6052e

  • Plug the power cord into the printer's rear and the other end into an electrical outlet.
  • Next, turn on your printer.
  • You will see a purple light flashing at the printer’s center.

Start Loading The Paper - HP ENVY 6052e

  • Now, pull out the input tray from the printer and slide the paper width guides as far as possible.
  • Load some plain white sheets into the input tray and slide the paper width guides until they move to the edges of the stack.
  • Do not load the sheets above the load limit mark.
  • Insert the input tray.
    Insert The Input Tray

Installing Ink Cartridges For HP ENVY 6052e

  • Now, a light will blink at the printer’s corner, which is the indication to install the ink cartridges.
  • Lift the ink cartridge access door and wait until the carriage moves to the center.
  • Unpack one of the cartridges and discard the protective tape.
  • Insert the ink cartridge into the respective slot.
  • Repeat these instructions to install the remaining ink cartridges.
    Insert The Ink Cartridge
  • Finally, close the ink cartridge access door.

Software Setup - HP ENVY 6052e

You can quickly download and install the driver by visiting the official support page of your printer. But, before installing it, ensure that the driver supports both your printer and computer. So, as per the instructions given below, you can download the printer driver on your computer.

  • Launch a browser on your computer and search for the printer’s official support page.
  • Choose the Support tab and select the Software and drivers option.
  • Go for the Printer category.
  • In the next window, type your printer model name below the Enter your product name field and click on the Submit button.
  • Your computer’s operating system will be shown automatically at the top of the window on the next page.
  • If you want to change the operating system, click on the Choose different OS option and select your respective operating system with its version from the drop-down list.
  • Click the Change button.
  • Scroll down the window and click the Install button below the Driver-Product Installation Software section.
  • Installation Software Section
  • Now, follow the on-screen prompts to complete the HP Smart app installation.


Now, you should have learned how to set up your newly purchased HP Envy 6052e printer and download the compatible driver on your computer. With the simple HP envy 6052e setup guidelines given on this page, you can successfully operate your printer.

To know more information about your printer, click the call option to contact our technical experts.