Hp Envy 5000 Printer Setup

  • /
  • Hp Envy 5000 Printer Setup

Hp Envy 5000 Printer Setup

The HP Envy 5000 printer is an entry-level machine with all-in-one features. The all-in-one printer has a shot at all the features and helps reduce running costs. The standard interface comes with Wi-Fi and also wired connections. Other connectivity options are AirPrint, Mopria, and HP e-print. The printer can produce documents at the rate of 10 ppm for monochrome and 7 ppm for color.

Hp Envy 5000 Printer Setup

CONTENTS IN THE BOX

  • The HP Envy 5000 printer
  • Power Cord
  • Ink Cartridges
  • Documentation sheets

HARDWARE SETUP

  • Unpack the HP Envy 5000 printer from the carton.
  • Ensure that you place the printer on a flat surface and preferably closer to the computer and the wireless router.
  • Peel the protective tapes surrounding the printer body and discard them.
  • Remove the power cord from the sealed packaging.
  • Connect the power cord to the main power source and to the back end of the HP Envy 5000 printer.
  • Now, you need to press the Power button to turn on the printer.
  • Open the cartridge access door(to install the ink cartridges).
  • Unpack the ink cartridges from the packaging.
  • Remember to peel off the protective tape from the cartridges and discard them.
  • Place the cartridges into the respective slots and ensure that they click in place.
  • Close the cartridge access door.
  • Remove the paper tray.
  • Slide the paper guides horizontally and vertically inside the paper tray.
  • Place a paper stack into the paper tray and adjust the guides according to the edges of the paper.
  • Finally, insert the paper tray back into the printer.

SOFTWARE SETUP

Based on the operating system you are using, either the Microsoft Store (Windows) or the App Store (Mac) page will open.

  • Run the installation for the HP Smart app.
  • Click + printer to add the HP Envy 5000 printer to HP Smart.
  • Add the HP Envy 5000 printer to the HP Smart app and follow the on-screen commands; complete the full setup.
  • You can connect the printer to the wireless network and complete other downloads if necessary.

HP ENVY 5000 MANUAL DOWNLOAD

With the assistance of the HP Envy 5000 printer driver, you can download it to your computer and perform the tasks the printer supports. You can download the printer driver for the computer from this page or even from the official HP support page. Further instructions are as follows.

Hp Envy 5000 Manual Download

HP ENVY 5000 DRIVER FOR WINDOWS

  • Click the Driver Download button on this page. The page will automatically detect the OS and download the printer driver.
  • If you wish to download the printer driver for your computer from the HP support page, you can do so in simple steps.
  • Open the support page for the HP Envy 5000 printer.
  • Click the Software, Drivers and Firmware tab.
  • Select the Choose a different OS option and select Windows and the version.
  • Choose the driver you wish to download; all you need to do is click the Download button.

HP ENVY 5000 DRIVER FOR MAC

  • On this page, click the Driver Download button for Mac.
  • Once the click is made, the driver will be downloaded to your Mac computer at ease.
  • An alternative way to download the driver is from the official HP support page.
  • Open the default browser on your computer.
  • Enter the URL for the HP Envy 5000 printer support page.
  • Click the Software, Driver and Firmware tab.
  • The support page will detect the operating system and will show you the HP Smart download prompt.
  • Click the Install button.
  • The App Store will open on your computer.
  • Click the corresponding button to download.

HP ENVY 5000 DRIVER INSTALL

  • Ensure that the computer is also connected to the same wireless network as the printer.
  • You must create an HP account to access all the functions of the printer.
  • Once the HP Smart app download is complete, run the installation.
  • Open HP Smart.
  • Usually, the app finds the printer automatically. If not, click the + button and add the HP Envy 5000 printer to the app.
  • Complete the installation for the HP Envy 5000 printer.

HP ENVY 5000 MANUAL DOWNLOAD

  • Do a click on the Manual Download button on this very page, and the manual will be downloaded immediately.
  • One more way to download the manual is from the official HP support page.
  • Open the HP Envy 5000 printer support page.
  • Click the Manuals tab.
  • Click the manual you want to download.
  • The manual you chose will open in a new tab.
  • Click the Download icon on the top-right corner of the page.

HP ENVY 5000 WIRELESS SETUP

Having the HP Envy 5000 printer connected to the wireless network can be a huge boost for you. There are different ways in which you can connect this particular HP Envy 5000 printer to the wireless network.

HP ENVY 5000 WIRELESS SETUP MAC

Wi-Fi Protected Setup

To use the Wi-Fi Protected Setup method, you need to have a router with a WPS button. Here are the steps.

Hp Envy 5000 Wireless Setup
  • Ensure that the printer is turned on.
  • Select Settings.
  • Press the Wireless icon present on the printer display.
  • You will find two options: Wi-Fi Setup Wizard and Wi-Fi Protected Setup.
  • Select Wi-Fi Protected Setup from the display.
  • You have now initiated the wireless setup.
  • Within the next couple of minutes, press the WPS button on the router.
  • The printer will be connected to the wireless network without any issue.

HP ENVY 5000 PRINTER SCANNER SETUP

  • Lift the scanner lid of the HP Envy 5000 printer.
  • Ensure that the scanner glass is free from all the dust residue.
  • Make sure that you place the original document on the scanner glass with the print side facing down.
  • Close the scanner lid.
  • The scanner setup is complete.

HP ENVY 5000 SCAN TO COMPUTER

  • Make sure that the HP Envy 5000 printer is turned on and connected to the computer.
  • Lift the scanner lid.
  • Place the original on the scanner glass with the print side facing down.
  • Open the HP printer software on your computer.
  • Navigate to the Print & Scan tab and select Scan.
  • Click Scan a Document or Photo.
  • Select the scan type you want to save the scanned document (under Scan Shortcuts).
  • Click the Scan button once done.

HP ENVY 5000 SCAN TO PDF

  • Load the original document in the scanner glass of the HP Envy 5000 printer.
  • Download the HP Smart app from the Microsoft Store or App Store.
  • Open the HP Smart app.
  • Click the Scan button.
  • Select the Scanner option.
  • Click on the Scan icon and make changes based on your requirements.
  • Select Save as PDF.
  • Click the Scan button to complete the scan.

HP ENVY 5000 SCAN TO EMAIL

  • Load the original document you want to scan on the scanner glass.
  • Ensure that the HP Envy 5000 printer is connected to the computer through a network.
  • Scroll down to the Print & Scan section.
  • Select Scan a Document or Photo.
  • Go to Scan Shortcuts.
  • Select the format of the scan by choosing Email as PDF or Email as JPEG.
  • Click the Scan button.

HP ENVY 5000 SCAN TO IPAD

  • Open App Store on your iPad.
  • Search for HP Smart.
  • Once the HP Smart page opens, tap the Get button.
  • Search for the HP Envy printer that is connected to the same wireless network as your smartphone.
  • Place the document on your HP Envy 5000 printer.
  • Select the Scan tab on your HP Smart app.
  • Follow the commands on your iPad screen and complete the scan.

HP ENVY 5000 TROUBLESHOOTING

There are times when a printer gets into trouble and you cannot do anything about it. At certain times, you need to know the steps to troubleshoot some problems. Here are some issues you might face while operating the HP Envy 5000 printer.

The printer going offline is not something new. There are different ways that can help you resolve in case the HP Envy 5000 printer goes offline. Here is one method that can be useful for you.

CONFIGURE PRINTER PROPERTIES

  • Open Control Panel on your Windows computer.
  • Select the Devices and Printers option.
  • Select the HP Envy printer from the list.
  • Do a right-click on the printer and click the Printer Properties option.
  • Click the Ports tab and click the Configure Port button at the bottom-right corner.
  • Click the checkbox to uncheck SNMP Status Enabled (only if the option is ticked).
  • Click the OK button to save changes.
  • Check the USB cable connected between the printer and the computer.
  • Check the firewall or the antivirus on your computer (there are times when the antivirus causes some problems with the devices connected to the computer).
  • Check the black ink cartridge installed on the printer, replace the cartridge if necessary.
  • Ensure that the HP Envy 5000 printer is connected to the wireless network (if printing wirelessly).

Here is a simple way to resolve the issue when your printer is printing blank pages.

  • Open Devices and Printers on your Windows computer’s Control Panel.
  • Select and do a right-click on the HP Envy 5000 printer.
  • Click Printer Preferences.
  • Click the Maintenance tab.
  • Select Extended Settings.
  • Click the checkbox to enable the Skip Blank pages option.
  • Click the OK button.
  • Ensure that there is a proper power supply in the place where the printer is connected to the power source.
  • Check the printer display for error messages and resolve the errors following the on-screen commands.
  • Ensure that the printer is not paused, stopped abruptly, or in offline mode.
  • If you have connected the HP Envy 5000 printer using a USB cable, make sure that the cable is connected properly to the printer and the computer.
  • Replace the USB cable if you find any fault with it.