HP Envy 4521 Ink Cartridge Replacement - Complete Guidelines

You will start receiving poor quality printouts, and sometimes, an error message ‘Low or Empty Cartridge’ when the ink cartridges installed on your printer run out of ink. The one and only way to fix the low or empty ink cartridge issue is to replace the cartridge with a new one.

We’ll be walking you through the simple and quick procedure that helps you in HP Envy 4521 Ink Cartridge Replacement on your printer in this section.

HP Envy 4521 Ink Cartridge Replacement

HP Envy 4521 Ink Replacement - Step-by-step Guide With Pictures

  • First, visit the HP Store and get the new cartridges for your printer.
  • Next, turn on your HP Envy 4521 printer if it is turned off.
  • Check if the input tray of the printer has enough paper. If not, load it because the printer will automatically initiate the alignment process after installing the cartridges. If the tray is empty, there is a chance for you to face an alignment issue. So, load the paper to avoid it.
  • Now, open the access door. Wait for the carriage to become idle. After that, remove the ink cartridge(s) that you want to replace from the respective slot. Store the used cartridge properly.
  • Unpack the new ink cartridge. Remove the orange tape from it. Gently install the cartridge into its slot. Close the cartridge lid and the door.
  • Now, the printer will try to recognize the installed cartridges. Once it is done, the Genuine HP Ink Cartridges Installed message will display on the screen.
  • Press OK. Now, the Load Plain Paper screen will open. If you have already loaded paper into the tray, press OK.
  • Otherwise, load the paper and press OK. Now, the printer will start printing the alignment page.
  • Place the page on the scanner glass and scan it to complete the alignment process.

This is how you know about HP Envy 4521 Ink Cartridge Replacements on your printer. Contact us for further assistance using the Call button.