Hp Envy 4516 Setup

Hp Envy 4516 Setup

With the HP Envy 4516 printer, you can have it all. The budget printer is best suited for running small projects for homes and small offices. The printer helps in saving paper by at least 50% and comes with automatic two-sided printing.

Hp Envy 4516 Setup

Contents:

  • The HP Envy 4516 printer
  • Ink Cartridges
  • Power Cord
  • Documentation Sheets

Hardware Installation:

  • Unpack the HP Envy 4516 printer from the carton.
  • Place the printer on a flat surface; ensure that the printer is placed close to the computer for easy connection.
  • Remove the protective tapes surrounding the printer body; discard them.

Power Connect:

  • Unpack the power cord from the sealed packaging.
  • Connect the power cord to the main power source and to the rear end of the HP Envy 4516 printer.
  • Locate and remove the packaging material present inside the printer.
  • Turn on the printer.

Place the cartridges:

  • The printhead will come to the optimal position.
  • Unpack the ink cartridges from the sealed packaging.
  • Now, remove the protective tape from the bottom of the cartridge.
  • Make sure that the latch of the cartridge slot is open for both.
  • Place the ink cartridges into the respective color slots.
  • Close the cartridge latch, so it holds the cartridge in position.d
  • Close the cartridge access door.

Place printing media:

  • Open and pull the paper tray from the bottom of the printer.
  • Move the paper support guides to the sides inside the paper tray.
  • Have a paper stack ready in hand.
  • Adjust the paper to make sure that there are no problems while printing.
  • Once the paper media is placed, adjust the paper support guides in accordance with the edges of the paper.
  • Close the paper tray and insert it into the printer.

Software setup:

  • Open the official HP support page for HP Envy 4516.
  • Click thed Software, Drivers and Firmwared tab on the page.
  • Click thed Driver-Product Installation Softwared link.
  • Click thed Installd button for HP Smart.
  • Run the installation for the HP Smart app.
  • Click thed +d printer to add the HP Envy 4516 printer to HP Smart.
  • Add the HP Envy 4516 printer to the HP Smart app and follow the on-screen commands; complete the full setup.

HP ENVY 4516 DRIVER DOWNLOAD

The printer driver is essential if you want to perform tasks from your computer. You can download the printer driver easily from this page or from the official HP support page. Perform the installation and you are good to go. We have the steps to download the driver for Windows and Mac OS for you to have a better understanding.

Hp Envy 4500 Driver Download

HP ENVY 4516 DRIVER FOR MAC

  • Click the Driver Download button for Mac on this support page.
  • The driver will be downloaded immediately.
  • If you wish to download the driver from the official HP support page, you can do so.
  • Open the support page for HP Envy 4516.
  • Once the page opens, click the Software, Drivers and Firmware tab on the left page.
  • Click the Operating System drop-down list and select Mac.
  • Select the version and click the Change button.
  • Under the Driver-Product Installation Software section, click the Install button for HP Smart.
  • The Apple Store page will open with HP Smart recommendations.
  • Click the Get button.

HP ENVY 4516 DRIVER FOR WINDOWS 10

  • On this very page, click the Driver Download button.
  • The download will begin immediately and will be saved in your computer's downloads section.
  • You can also download the printer driver for your computer from the official HP support page.
  • Open the HP support page for the HP Envy 4516 printer.
  • Click the Software, Drivers and Firmware tab.
  • If you are using a Windows-supported computer, there is a high chance the support page detects the OS.
  • If not, click Choose a different OS option and select Windows and the version.
  • Expand the Driver-Product Installation Software option.
  • Click the Install button for Install HP Smart and add your printer.
  • The page will be redirected to the Microsoft Support page.
  • Click the Install button.

HP ENVY 4516 MANUAL

  • Click the Download button under the Manual section, and the download will happen within seconds.
  • You can also download and have the Manual from the Official HP Support page.
  • Open the support page for the HP printer.
  • Click the Manuals tab.
  • Select the manual and wait for it to open on a new page.
  • Click the Download button.

HP ENVY 4516 WIRELESS SETUP

The HP Envy 4516 printer supports wireless printing. With the help of the easy Wi-Fi Protected Setup, it's possible. Ensure that you have a router that is enabled with the WPS button.

Hp Envy 4500 Wireless Setup
  • Press the Wireless icon on your printer display.
  • Select Settings.
  • Touch the Wireless Protected Setup option.
  • Within the next couple of minutes, press the WPS button on the router.
  • Wait for the connection to establish and the printer will eventually be connected to the wireless network.

HP ENVY 4516 SCANNER SETUP

To perform a scan, you need to know where you can place the originals on the HP Envy 4516 printer.

  • Ensure that the HP printer is turned on.
  • Lift the scanner lid.
  • Ensure that the scanner glass is clean from dust or any residue.
  • Place the document on the scanner glass with the printable side facing downwards.
  • Close the scanner lid.

To perform a simple scan from the control panel, load the document on the scanner glass.

  • Touch Scan.
  • Select the computer that is connected to the printer.
  • Choose the format of the scan and press OK.

HP ENVY 4516 SCAN TO COMPUTER

  • Open the HP Smart app or download it from the official support page for the HP Envy 4516 printer.
  • Click the Scan tab on the HP Smart app.
  • Click Get Started.
  • Click the Scanner tab.
  • Select the Settings icon and make changes based on your scan preferences.
  • Click the Scan button at the bottom of the screen.
  • You will see a preview of the original document in HP Smart.
  • Click the Apply button.

HP ENVY 4516 SCAN TO EMAIL

  • Load the original document you want to scan on the scanner glass of the HP Envy 4516 printer.
  • Open the HP printer software.
  • Under the Print & Scan tab, select Scan.
  • Click Scan a Document or Photo.
  • Select the format of the scan (Email as PDF or Email as JPEG) under the Scan Shortcuts section.
  • Click the Scan button.

HP ENVY 4516 TROUBLESHOOTING

In spite of the many laurels HP Envy 4516 is worthy of, there are some problems that you are meant to face with this printer. As we know, there are no printers that will not go through issues of their own. With this printer, there are some common issues you might face like the following.

Reset the printer:

  • Make sure the printer is turned on.
  • Remove the power cord from the HP printer and the plug from the main power source.
  • Wait for at least 1-2 minutes, and connect the power cord to the printer and the plug to the main power source.
  • If the HP printer doesn't power on, press the Power button on the control panel.

Delete Print Jobs:

  • Open the Control Panel on your Windows computer.
  • Click on the Devices and Printers option.
  • Select the HP Envy 4516 printer.
  • Perform a right-click on the printer and select the See what's printing option.
  • Do a right-click on each of the print jobs in the queue and select the Cancel option.

Method 1: Align the printer cartridges

Make sure that the HP Envy 4516 printer is properly placed on the surface.

  • Open the HP printer software on your computer.
  • Select the HP Envy 4516 printer from the series.
  • Select Align.
  • Choose Align again and follow the commands on the screen.
  • Click All Settings to return to the main page.
  • Print a test page in order to see whether the cartridges are aligned properly.

Method 2: Replace the cartridges

  • Open the cartridge access door of the printer.
  • Press the cartridge latch and remove the ink cartridges from the printer (color and black).
  • Unpack the ink cartridges from the sealed packaging.
  • Make sure that you remove the protective tape using the pull tab from the bottom of the ink cartridge.
  • Place the ink cartridge into its respective cartridge slot.
  • Ensure that it clicks properly in place.
  • Close the latch for the ink cartridges.

The best solution if the HP Envy 4516 printer is not printing black is to check the black ink cartridge and replace it.

  • Ensure that the printer is turned on.
  • Open the cartridge access door.
  • Remove the Black ink cartridge from the right side of the cartridge slot.
  • Make sure that the protective tape is peeled off from the Black ink cartridge.
  • Place the cartridge back into position and make sure it clicks in place.
  • Close the cartridge access door.
  • Open the HP support page for the HP Envy 4516 printer.
  • Click the Software, Drivers and Firmware tab on the left side of the page.
  • Scroll down and click the Utility-Diagnostic Tools section.
  • Click the Download button for the HP Print and Scan Doctor.
  • Once the HP Print and Scan Doctor download is complete, run the installation and open the utility.
  • Click the Start button.
  • Add the HP Envy 4516 printer.
  • Follow the prompts on the screen and resolve the scanning problem you are facing.
  • The process will take its own course.
  • Wait for the scanning to complete.