HP Envy 4510 Troubleshooting - Simple Solutions

Sometimes, you might face annoying issues with your HP Envy 4510 printer. But luckily, you can resolve all those issues with some HP Envy 4510 Troubleshooting methods. Troubleshooting is one of the best ways to get your printer back to work. Therefore, you can conveniently resume the printing or scanning job with your printer. By following the below troubleshooting instructions, you can resolve your printer issues.

HP Envy 4510 Troubleshooting

Fixing Print Quality Issue

Check The Print Settings

  • Before starting to print a document with your printer, make sure to load the paper into the input tray.
  • Open the document on your computer and select the Print option.
  • Make sure to select your printer from the available device list.
  • Now, open the Properties dialog box.
  • Here, select the Layout tab and choose the Orientation option you want to use from the drop-down list.
  • Click the Pages per Sheet drop-down list and choose the option you wish to use.
  • Next, select the Paper/Quality tab and set the media type, print quality, and color settings.
  • Click on the Advanced button and set the paper size.
  • Click the OK button to close the Properties dialog box.
  • Next, click the Print button to start the printing process.
  • Now, check if the issue is solved.

Fixing HP Envy 4510 Printer Offline Issue

Check The Printer Status

  • Select the Start menu on your computer’s main screen and navigate to the Control Panel window.
  • Now, choose the Hardware and Sounds option from the list.
  • Select the Devices and Printers option.
  • Right-click on your HP Envy 4510 printer’s icon and then pick the See what’s printing option.
  • Click on the Printer tab and deselect the Use Printer Offline option from the drop-down list.
  • Otherwise, navigate to the Pause Printing option and deselect it from the drop-down list.
  • Next, check whether the printer is back in online mode.

Fixing The Printer Not Printing Issue

Check The Connectivity

  • First, ensure that the power cord is securely connected to the printer's rear and the other end is firmly plugged into the electrical socket.
  • Make sure to turn on your printer.
  • Suppose you have connected your printer and computer using a USB cable, ensure that the cable is connected securely at both the end ports.
  • If you have connected the devices using a Wi-Fi network, check whether the HP Envy 4510 printer and the computer are on the same network.
  • Now, check whether your printer is printing properly.
  • If the issue continues, replace the low/empty ink cartridges on your printer by following the below steps.

Replace The Low/empty Ink Cartridge

  • First, you need to check the cartridge ink level on your printer.
  • If the ink level is low, you need to replace the respective ink cartridge.
  • Open the ink cartridge access door of your
  • Slowly remove all the empty ink cartridges from the respective slots.
  • Now, uncover the new cartridge from the package and remove the protective tapes.
  • Insert the new ink cartridge into the respective slot.
  • Ensure that the cartridge is installed correctly in its place.
  • Repeat these instructions to replace the remaining empty ink cartridges.
  • Close the ink cartridge access door of your
  • Print a test page and check whether the issue is solved.

Now, You you know about HP Envy 4510 Troubleshooting issues by following the above instructions.

In case you have any other queries regarding your printer, reach our technical experts. You can use the call option provided on this page for this purpose.