HP Envy 4502 Wireless Printer Setup

  • Home /
  • HP Envy 4502 Wifi Printer Setup

Learn how to unbox and perform your HP Envy 4502 wireless printer setup.

Anyone with basic knowledge and skills in operating electronic gadgets can set up a printer right from its unpacking to the software installation. However, going through the setup instructions once before starting the setup will help you perform the printer setup easily without a problem.

This page shows you how to unbox and set up the HP Envy 4502 wireless printer. If you’re using the same printer or an HP Envy 4500 series printer, you can refer to the instructions below to set up your printer.

[Toll-Free: Reach our technical expert team if you need real-time assistance in performing the HP Envy 4502 wireless printer setup. Kindly use the button provided here for the purpose.

HP Envy 4502 Wireless Printer Setup

HP Envy 4502 Wi-fi Printer - First-time Setup

The overall HP Envy 4502 wireless printer setup process includes five simple steps, and they are explained below.

Preparing The HP Envy 4502 Printer

  • Unpack your new HP Envy 4502 printer completely to prepare it for the setup.
  • To do so, take the printer out of the box if you haven’t done it yet.
  • Place the printer on a neat and stable surface.
  • Remove all the packing materials from the inside and outside of the printer.
  • After preparing your printer for the setup, move it closer to an electrical outlet.

Turning On The HP Envy 4502 Printer

  • Turn on your HP printer to begin the setup.
  • For the same, use the power cord of your printer that is shipped with the product box.
  • Now, plug one of the ends of this cord into your printer’s inlet that is at the back of the machine.
  • Connect the opposite end of the same cord directly to the outlet.
  • Don’t connect the USB cable now. Connect it only when prompted during the software installation process.
  • Once your printer becomes stable and ready to use, the Language screen will open.
  • Choose the device language of your preferences from the list and tap Continue.
  • Configure the other settings, such as date/time, region, etc., by following the on-screen instructions.

Completing The Printer’s Hardware Setup

  • Press OK if the screen below is opened on your printer.
  • Raise the scanner unit to install the ink cartridges on your printer.
  • Unpack the genuine HP ink cartridges that were shipped with your printer.
  • Open the cartridge lids.
  • Install the black cartridge on the right-hand side and the tri-color one on the left-hand side of the slot.
  • Close the lids and lower the scanner unit.
  • Now, press OK again if the “Initializing…” message is displayed on your printer screen.
  • Pull out the paper tray and its extender.
  • Fan and load a stack of paper into the tray.
  • Adjust the guides properly.
  • Close the input tray.
  • Open the output tray and its extender.

Aligning The Ink Cartridges

  • The HP Envy 4502 printer will print an alignment page if you have installed the ink cartridges and loaded paper correctly into the tray.
  • Scan the printed alignment page using your printer’s scanner glass.
  • Once the ink cartridges are aligned, the Alignment Successful screen will open.
  • Tap Continue on the opened screen.

Installing The Printer On A Device

  • The Setup Wireless screen will open when you complete the alignment process.
  • If you wish to use the Wi-Fi connection to install the printer on your computer, select the via Software or via Printer option and follow the on-screen instructions.
  • Otherwise, select Not Now.

We hope that the HP Envy 4502 wireless printer setup instructions have helped you set up the printer. For more details, contact us by making use of the call option. Also learn about HP Envy 4502 Driver Download.

Call Us