Hp Envy 4501 Wireless Setup - Quickly

When you complete your printer’s wireless setup, you don’t need to connect it directly to your computer via USB. Therefore, wireless printers are preferred nowadays for home and office printing. Continue reading this article to complete the Hp Envy 4501 Wireless Setup.

If you have a wireless router, you can implement the traditional method of connecting devices: Wireless setup wizard. If your router is WPS-enabled, you can establish a connection between your printer and router via WPS (Wi-Fi Protected Setup). In case you don’t have a router, you can connect your printer wirelessly via Wi-Fi Direct. On this page, we have discussed each procedure in detail. Without further ado, let us look into the wireless setup procedures.

Hp Envy 4501 Wireless Setup

Connect Your Printer To Your Wps-enabled Router

  • Press your printer’s Wireless button and hold it until the wireless light starts flashing. Alternatively, press the Wireless button and select Settings> Wi-Fi Protected Setup> Push Button.
  • Now, press your router’s WPS button. A connection between your printer and router will be established within a few seconds.
  • In case you cannot locate the WPS button on your WPS-enabled router, you can establish a connection via the WPS PIN method.
  • Access the Settings section of your printer and select Wi-Fi Protected Setup> PIN. Now, your printer will show you an eight-digit PIN. You just need to log in to your router’s configuration utility and enter this PIN in the WPS section.
  • This is how you should perform the HP Envy 4501 wireless setup via WPS. If you don’t have a WPS-enabled router, proceed to the following section.

Connect Your Printer Wirelessly Via Wi-fi Setup Wizard

  • On your printer control panel, press the Wireless button and select Settings> Wireless Setup Wizard.
  • When it shows you the nearby networks, choose your router’s SSID and enter the password in the respective field.
  • Input the credentials manually if you cannot locate your router’s name.
  • Now, your printer will be connected to your router’s network.

Connect Your Printer Wirelessly Via Wi-fi Direct

  • On your printer’s home screen, pick Wireless Direct.
  • From the menu named Wireless Direct, select Wireless Direct and press OK.
  • Now, head over to your smartphone and enable Wi-Fi.
  • When it shows you a list of nearby networks, select your printer’s name and enter the password in the appropriate field. If you have selected the On without security option on your printer, you don’t need to enter the password to connect the printer via your devices.
  • Now, you have connected your printer to your network. If you want to know the procedure for connecting your printer and computer, refer to the following section.

How To Connect Your Printer And Computer

  • You need the driver to access your printer from the computer; you can get this software from HP’s official support page.
  • From your default browser, visit HP’s website.
  • Input the model - HP Envy 4501 and press the Enter key.
  • It directs you to the product support page; there, click Software, Drivers and Firmware.
  • Now, your Operating System will be detected, and the compatible software will be displayed; choose the most preferred software and click the Download button.
  • Run the setup file and install the software on your computer by following the instructions.
  • Ensure that your HP printer and computer are connected to the same network.
  • Now, start accessing the printer from the computer wirelessly.

In this manner, you should complete your Hp Envy 4501 Wireless Setup. If you have questions or need clarifications, reach our technical experts for real-time assistance. For the same purpose, we’ve provided a Call button on this page. You can use it to get in touch with our experts.

Call Us